The 1ED32xx series of high-voltage gate drivers for industrial equipment and consumer products that support 650V/1200V/1700V/2300V IGBTs, Si and SiC MOSFETs.
The maximum output voltage is 18A, and the built-in input filter eliminates the need for an external filter. VDE 0884-11 (reinforced insulation) and
It is a combination of 2L-SRC and has the highest drive capability among 2L-SRC compatible products.
Target applications: industrial motor drives, solar inverters, EV charging, power storage systems, etc.

Single-channel gate driver with 3kVrms input-to-output isolation. The 1EDB series has a propagation delay accuracy of +4/-6ns,
It is ideal for high-speed switching applications that require high efficiency at the system level. The undervoltage lockout function (UVLO) of the output stage can be selected from 4V/8V/12V/15V, so it can be considered widely. In addition, it is a product with excellent resistance to switching noise.
Target applications: PFC and LLC in servers and communication equipment, three-phase rectifier circuits in charging stations for electric vehicles, etc.

We have had a lineup of 4.5 kV IGBT modules equipped with IGBT3 technology chips for some time, but the latest front-end
The lineup has been expanded with IGBT4 technology using back-end technology and design. The previous generation has already shipped more than 100,000 units
It is possible to realize even lower loss while inheriting its high reliability.
Target applications: power transmission and distribution, motor control and drives, etc.

EasyPACK™ with SiC MOSFETs in H-bridge configuration and EasyBRIDGE rectifier modules with SiC Schottky diodes are
An ideal proposal for DC EV power supply designs up to 75kW. EasyPACK™ has an RDSon of 23mΩ/45mΩ in the Easy1B package and
It becomes 11mΩ/15mΩ and realizes flexible design when combined with EasyBRIDGE rectifier modules with rated currents of 20A/40A/60A.
Target applications: EV power supply, etc.

The TLE92104 series can control up to 4 half-bridges (up to 8 N-ch MOSFETs) in one package. By 24bit SPI communication,
It enables device configuration and half-bridge control, as well as extensive diagnostic functions. A small package of 7mm x 7mm also reduces the board area
It can be realized. There is also a family product, the TLE92108 series, which can control up to eight half-bridges.
Target applications: seat controls, closure systems, window lifts, central door locks, etc.

The TSDSO-24 package has a lineup of 8/10/12 half-bridge outputs, and a maximum of 11 motors can be cascaded and driven in one package. Daisy chain for control/diagnosis and 16bit standard SPI communication with in-frame response function enables quick diagnosis with global error flag. By unifying the package, it is possible to consider replacement with pin compatibility according to the load of the motor.
Target applications: DC motor applications, HVAC flaps, mirror control, etc.

We have newly released a power MOSFET with a withstand voltage of 80V in a small package of 5mm x 6mm called Super SO8. In addition to improved robustness,
It achieves high power density and meets the need for system cost reduction and performance improvement. Due to low reverse recovery charge (Qrr) and low thermal resistance (RthJC)
It has characteristics such as excellent thermal behavior, and is specially designed for synchronous rectification such as communication power supplies and server power supplies.
Main applications: servers, telecoms, high power SMPS, etc.

The PROFET™+2 12V family of protected high-side switches for 12VBatt environments offer state-of-the-art diagnostics and protection features for superior
It has a current sense accuracy (kILIS). The TSDSO-24 is a new addition to the existing PROFET™+2 12V family.
The BTS700xx-1ESP series of packages can drive currents up to 32A with low RDSon.
Main applications: junction Box, relay Box, BCM, heater control, etc.

6-in-1 module with an automotive grade 1200V SiC MOSFET optimized for electric drivetrains. lineup
1200V/400A (8 chips per switch) and 1200V/200A (4 chips per switch).
It is the best product for xEV vehicles. In the design of inverters, we achieve high output of up to 250 kW and optimization of system size.
Main application: main inverter for electric vehicles

We have renewed the product lineup of 60mm thyristor/diode modules that use pressure contact technology. The new Eco Block series meets the demand for cost-effective large modules and is also ideal for large power supplies. In addition, we designed the Prime Line 60mm module to handle cases where the rating is 600A or more and parallelization of modules is difficult. Optimized thermal resistance and support for higher operating temperatures deliver superior performance.
Main applications: soft starters, wind power generators, drives, UPS (uninterruptible power supply), etc.

A reference design for a dimmable white LED driver, using the 80V LED driver IC ILD8150E, two identical channels and
It consists of one 3.3V auxiliary power supply. XDPL8219 board for the primary side of a digitally adjustable AC/DC flyback converter and
A modular reference design combining this board is also available.
Main application: LED lighting, etc.