Quartus® Prime Development Software - Supported Devices Compatibility Chart

Narrow down by specifying conditions

現在2136件がヒットしています。check

DesignFPGA /CPLD/ASIC Altera Corporation

The Quartus® Prime and Quartus® II development software support different device families depending on the version.

This page provides a table showing the device families supported by the latest version of the Quartus® Prime design software and its most recent version.

For older version environments and device family information not listed on this page, please refer to the latest version of the Quartus® Prime / Quartus® II Development Software Supported Devices Compatibility Table.

This page recommends Google Chrome as the web browser. If the table is not displayed correctly, please use Google Chrome or download the Quartus® Prime / Quartus® II Development Software Supported Devices Table [latest version] and check it.

For information on legacy devices (APEX® series, ACEX® series, FLEX® series), please refer to the legacy materials ver.14.0 or earlier.

For information on Altera® FPGA / CPLD development flow, please see here.

Table 1: Quartus® Prime Pro Edition Supported Devices

device family	Version	25.3	25.1/25.1.1	24.3/24.3.1	24.2	24.1	23.4	23.3	23.2	23.1	22.4	22.3	22.2	22.1	21.4	21.3	21.2	21.1	20.4	20.3	20.2	20.1	19.4	19.3	19.2	19.1	18.1	18.0	17.1	17.0	16.1	16.0	15.1
Agilex^TM7 ^※(8)		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	★	×	×	×	×	×	×	×	×	×
Agilex^TM5 ^※(7)(8)		●	●	●	●	★	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×
Agilex^TM3 ^※(7)(8)		●	★	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×
^Stratix® 10		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	★	×	×	×	×
Arria ^® 10 / Arria ^® 10 SoCs		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●
Cyclone® ^10GX ^*(7)		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	★	×	×	×

[Symbols] ●: Supported *(1)(2)(3) / ★: Supported / ▲: Supported only for some model numbers *(4) / ×: Not supported / －: Supported
* See the bottom of Table 2 for notes in the table.

Table 2: Quartus® Prime Standard / Lite Edition Supported Devices

device family	Version	25.1		24.1		23.1.1 / 23.1		22.1.2 / 22.1.1 / 22.1		21.1.1 / 21.1		20.1.1 / 20.1		19.1		18.1		18.0		17.1		17.0		16.1		16.0		15.1
device family	Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition	Standard Edition	Lite Edition
^Stratix®V		●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×
^Stratix® IV		●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×
Arria ^® 10 / Arria ^® 10 SoCs		●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×
Arria ^® V / Arria ^® V SoCs		●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×
^Arria® II GZ		●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×	●	×
^Arria® II GX		●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲	●	▲
^Cyclone® 10 LP		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	★●	★●	×	×	×	×	×	×
Cyclone ^® V / Cyclone ^® V SoCs		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●
^Cyclone® IV		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●
^MAX®10		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●
^MAX®V		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●
^MAX®II		●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●	●

[Symbol] ●: Supported ※(1)(2)(3) / ★: Supported ※(1) / ▲: Supported only for some model numbers ※(4) / ×: Not supported / －: Supported until end

*(1) Only some model numbers may be supported for the first few versions. Part numbers labeled as Advanced or Initial in the Quartus® Prime and Quartus® II device selection screens represent devices that will be supported in near future releases. Advanced part numbers can compile, simulate, perform timing analysis, and generate device pin-out information, but no programming files. Part numbers marked Initial can be compiled, simulated, and run timing analysis, but device pinout information and programming files will not be generated.

*(2) The timing model used for timing analysis may be Preliminary. Please check the Quartus Prime Standard Edition Software and Device Support Release Notes or the Quartus Prime Pro Edition Software and Device Support Release Notes for part numbers with fixed timing models. (See the documentation for your version in the "Table 2: Release Notes and readme.txt Files" on the destination web page.)

*(3) Please refer to "Quartus Prime Standard Edition Software and Device Support Release Notes" or "Quartus Prime Pro Edition Software and Device Support Release Notes" for supported model numbers. (See the documentation for your version in the "Table 2: Release Notes and readme.txt Files" on the destination web page.)

*(4) For Quartus® II Web Edition 12.0 and earlier, please search for Quartus® II Web Edition Definition from the Help menu of each version ⇒ Search Index. Starting with Quartus® II Web Edition 12.1 and Quartus® Prime Lite Edition, Arria® II supports EP2AGX45 devices only. Also, in Quartus ® II Web Edition 11.1 to 15.0, Cyclone ® V supports all part numbers except the highest density products.

*(5) Quartus® II Arria® 10 Edition is development software for the Arria® 10 family only.

*(6) Quartus® II 14.0.2 (14.0 Udate2) or later is supported.

*(7) Agilex ^™ 5, Agilex ^™ 3, and Cyclone® 10 GX devices can use the Pro Edition for free.

*(8) For support status of Agilex ^TM 7 / 5 / 3 FPGA devices, please contact your Altera FPGA representative at your distributor.

Quartus® Prime / Quartus® II Development Software Supported Devices Compatibility Chart [Latest Edition]