PolarFire FPGA Video Kit

Microchip's PolarFire Video KIT allows easy evaluation of a variety of interfaces.

- CoaXPress and SDI interfaces can be evaluated by inserting a dedicated daughter card (sold separately)

 

The kit equipped with 300K logic element (LE) low-power FPGA "PolarFire"

It is ideal for mid-band (~12.7Gbps) imaging and video applications.

 

* Please refer to the following URL for the lineup of exclusive daughter cards.

https://www.microchip.com/en-us/development-tools-tools-and-software/development-tools-category-explorer?category=fpga-hardware-and-kits/polarfire-fpga-development-kits

*PolarFire Video KIT model number: MPF300-VIDEO-KIT-NS

Contents of the development kit

• PolaFire Video KIT (with MPF300T-1FCG1152E device)
• Dual camera sensor board (IMX334)
• HDMI cable
• 12V AC adapter
• USB 2.0 cable (USB A to MicroB)
• Quick Start Card

Introduction of interface

・MIPI CSI-2 RX Connector + Dual Camera Sensor

4K video data can be received from the included dual camera via the MIPI CSI-2 RX connector with the FPGA's general-purpose I/O.

・MIPI CSI-2 TX Connector

Data (4 lanes) and clocks can be output directly from the FPGA's general-purpose I/O.

・HDMI 2.0 RX

4K video data can be received from the FPGA transceiver port via the HDMI2.0 RX connector.

*Picture-in-picture (PIP) demonstration of HDMI output from a PC is also possible.

・HDMI 2.0 TX

4K video data can be output from the FPGA transceiver port via the HDMI2.0 TX connector.

・HDMI 1.4 TX

2K video data can be output from general-purpose I/O of FPGA via HDMI PHY.

・FMC Connector

It is connected to Bank4 and transceiver of PolarFire FPGA, and various I/F can be expanded and verified by inserting a daughter card.

*Currently available daughter cards are CoaXPress, SDI, and USXGMII.

・DSI (Display Connector)

Data (4 lanes) and clocks can be output directly from the FPGA's general-purpose I/O.

・USB-UART

USB-UART is programming with JTAG port via USB UART bridge (FT4232) and controlling RISC-V (Mi-V) with general-purpose I/O of FPGA.

・JTAG Programming header

FPGA programming is possible with On-board FlashPro5.

*FlashPro4/5: Download cable for Microchip FPGA.

demo design

This is a picture-in-picture (PIP) demo design available on the Microchip technology web site.

AN5270: PolarFire 4K Dual Camera Video Kit (Earlier DG0849)
https://www.microchip.com/en-us/application-notes/AN5270

After clicking on the link above, you will be able to access various data.

Inquiry / Quotation

If you have any questions or would like a quote regarding this article, please contact us using the form below.