Summary of four types of Lattice FPGAs using the FD-SOI process

Features of Lattice's 28nm FD-SOI Nexus Series

The Nexus series has four types: Certus-NX, CertusPro-NX, CrossLink-NX, and MachXO5-NX.

They have the following common features:

Please refer to the table below for the features of each device. (Click the blue letters for details)

	Certus-NX	Certus Pro-NX	CrossLink-NX	MachXO5-NX←New
Logic Cells	17K/39K	52K/96K	17K/39K	25K
Embedded Memory Bits (kb)	432 / 1,512	1,728 / 3,744	432 / 1,512	1,440
Large Memory Bits (kb)	2560/1024	2,048 / 3,584	2560/1024	512
DSPs (18x18 Multipliers)	24/56	96/156	24/56	20
ADC Blocks	✔	✔	✔	✔
Oscillator (450KHz / 128KHz)	✔	✔	✔	✔
GPLL	twenty three	3/4	twenty three	2
PCIe Hard IP	Gen2	Gen3	Gen2	-
2.5Gbps MIPI D-PHY	-	-	✔	-
Main features	Equipped with Large RAM Built-in ADC	Supports MAX10Gbps SERDES PCIe Gen3 compatible	Supports MAX 2.5Gbps/lane Built-in MIPI D-PHY PCIe Gen2 compatible	Built-in Flash Abundant 3.3VI/O
Example of recommended specifications	process sensor information while the latter main board and to communicate ◎ For processing on the edge side	reduce fever PCIe, SGMII, SLVS-EC, DP/eDP,CoaXPresssuch as ◎ for high-speed communication	CMOS Image sensor and MIPI CSI-2/DSI I/F Bridge scaler, etc. ◎ for image processing	Built-in Flash, In addition to abundant 3.3VI/O Control around the motor by suppressing heat generation For collecting sensors ◎

If you want to return to the Lattice manufacturer information top page, please click below.