Let's experiment with ADALM2000! - Semiconductor Business -Macnica

Narrow down by specifying conditions

現在2159件がヒットしています。check

Design Analog Devices

ADALM2000: See, Touch, and Understand Electronic Circuit Evaluation

The ADALM2000 is a multi-function measurement module from Analog Devices aimed at education and learning. It combines the functionality needed for evaluating electronic circuits, including an oscilloscope, signal generator, and logic analyzer, into a single unit.

In this series, we will introduce you to the ADALM2000, a portable laboratory that lets you visually understand the operation of electronic circuits. Even without expensive measuring equipment, with just a PC and this one device, you can easily, deeply, and enjoyably explore the world of circuits.

Content list

release date	title	Overview	Equipment used
May 21, 2025	ADALM2000, the portable laboratory	This article explains the overview and setup method of ADALM2000.	ー
August 20, 2025	Op-amp low frequency noise evaluation	This article explains specific methods and benefits of practical circuit evaluation.	EVAL-KW4502Z
March 23, 2026	unity gain circuit	This article explains how to evaluate a unity-gain circuit using an operational amplifier (OP97).	ー
May 13, 2026	Inverting amplifier circuit	This article explains how to evaluate an inverting amplifier circuit using an operational amplifier (OP97).	ー

ADALM2000 peripheral board list

This is a list of ADALM2000 peripheral boards and the experiments you can do with them.

model number	What you can experiment with and learn
EVAL-KW4502Z	Op-amps (e.g. ADA4077, ADA4522, LT1782 etc.) Low Frequency Noise Performance can be evaluated.
EVAL-KW4503Z	ADA4510-2 TIA (Transimpedance Amplifier) It is configured as Change in phase margin due to differences in compensation capacitance (Unstable, 45 °, 70 ° or more).
ADALP2000	Analog circuit construction and measurement Build operational amplifier circuits, transistor amplifiers, sensor circuits, etc., and measure and analyze them with ADALM2000 Electronic component characterization Experiment with diode IV characteristics, transistor operation, LED response, etc. Educational and prototyping applications Providing an environment where students and engineers can easily design and verify circuits
AD-M2KPWR-EBZ	This is an expansion board that increases the output current of the ADALM2000, which is normally around 50mA, to a maximum of 700mA. It can also be used for circuit experiments that drive larger loads and for devices that require power, such as motors and LED arrays.
ADALM-SR1	Learning about Switching Regulators Learn about the configuration and operating principles of step-down and step-up converters. Through actual circuit configuration, you can experience the difference between open-loop and closed-loop control, peak current mode control, and more.
ADALM-BUCK-ARDZ	Observing the Basic Operation of a Buck Converter You can experience voltage conversion (high voltage to low voltage) through switching operation using an actual circuit. You can use it in combination with an Arduino UNO compatible device to perform PWM control and check the behavior of voltage mode control.
AD-M2KBNC-EBZ	Adapter board that allows connection to oscilloscopes and test leads This allows evaluation using probes instead of jumper wires. 2 channels of single-ended input / output You can also change it to differential input by changing the jumper.

Purchase equipment here

You can learn about electrical circuits using ADALM2000.

release date	title	Overview
April 7, 2026	Information for learning about electrical circuits	This section introduces the content you can learn in the Fundamentals of Electrical Circuits course.

Inquiry

If you have any questions regarding this article, please contact us below.

Analog Devices Manufacturer Information Top

Analog Devices Manufacturer Information If you would like to return to the top page, please click below.

Return to manufacturer information Top

Site Search