Features

• Ultra-low power consumption accelerometer
• Operating power consumption 1.8uA (@100Hz ODR)
• Power consumption in wake-up mode 270nA
• High resolution: 1mg/LSB
• Has built-in features that enable system-level power savings

This is a shield board equipped with an acceleration sensor ADXL362 that achieves the lowest power consumption in the industry. Sample code is provided, so you can immediately evaluate with confidence. Why not try an accelerometer as an IoT vibration sensor?

Click here to purchase products
Arduino Compatible Evaluation Board EVAL-ADXL362-ARDZ

Features

• Shield board for weight sensor
• Equipped with low noise, low power consumption AD converter, OPAMP
• 4-wire or 6-wire weight sensor can be connected

Weight can be easily measured by connecting with a load cell. Detailed setup information is also posted on the Analog Devices website, so you can try it with confidence. Would you like to try it once?

Click here to purchase products
CN0216 Arduino Compatible Evaluation Board EVAL-CN0216-ARDZ

Features

• Gas detection is possible by connecting with an electrochemical sensor
• Less than 1ppm usable resolution
• Low power consumption

It can be equipped with an electrochemical sensor and can measure toxic gases. Connect to a PC and press the RUN button on the GUI to collect concentration data in as little as one second. Please consider it as an IoT sensor node or for studying a circuit that detects toxic gases.

Click here to purchase products
CN0357 Arduino Compatible Evaluation Board EVAL-CN0357-ARDZ

Features

• Simultaneous detection of two types of gas
• Equipped with practical resolution for gas concentrations of less than 1ppm
• Low power consumption

A sensor shield that detects two types of gases simultaneously. (This is a dual version of the CN0357.) This circuit optimally combines components designed to achieve low power consumption and low noise performance with a single power supply, so please consider it for gas detection applications. Please give me.

Click here to purchase products
CN0396 Arduino Compatible Evaluation Board EVAL-CN0396-ARDZ

Features

• Sensor shield for temperature measurement
• Thermocouple (4ch digital output) can be used
• Cold junction compensation

You can easily implement a temperature measurement circuit using a thermocouple. This sensor shield can handle up to 4 independent connected thermocouple channels. Also, the resistance temperature detector (RTD) in each thermocouple channel provides cold junction compensation (CJC), so no additional compensation is required. Recommended for those who want to try a thermocouple measurement system once.

Click here to purchase products
CN0391 Arduino Compatible Evaluation Board EVAL-CN0391-ARDZ

Features

• Sensor shield for temperature measurement
• Thermocouple (4ch analog output) can be used
• Cold junction compensation

You can easily implement a temperature measurement circuit using a thermocouple. This sensor shield can handle up to 4 independent connected thermocouple channels. The thermocouple signal connected to this sensor shield is digitally processed by the AD converter built into the ADUCM360 mounted on the microcomputer platform. As with CN0391, no additional compensation is required. Recommended for those who want to try a thermocouple measurement system once.

Click here to purchase products
CN0394 Arduino Compatible Evaluation Board EVAL-CN0394-ARDZ

Features

• The built-in photodiode can detect three wavelengths of RGB.
• 16bit digital processing
• low consumption

The photodiode mounted on the shield can detect the wavelength change emitted when the plant undergoes photosynthesis. Photodiodes are equipped with three photodiodes to detect different wavelengths (red, blue, green). It is highly recommended for those who are interested in IoT in agriculture and light wavelength analysis.

Click here to purchase products
CN0397 Arduino Compatible Evaluation Board EVAL-CN0397-ARDZ

Features

• Shields for pH, moisture and temperature measurement
• Equipped with low power consumption and high resolution (24bit) AD converter

Soil moisture, pH, and temperature data can be obtained from the connected moisture sensor. This circuit uses a single power supply, low power consumption, and is designed with high precision, so it is recommended for those who want to try it to create the best soil for crops.

Click here to purchase products
CN0398 Arduino Compatible Evaluation Board EVAL-CN0398-ARDZ