- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Narrow down by specifying conditions
There are currently 4332 hits.
Texas Instruments CC2650STK: Is it possible to restore the SimpleLink SensorTag's firmware to factory defaults?
SimpleLink SensorTag debugger CC-DEVPACK-DEBUG (sold separately) is required to rewrite the firmware, but there are two rewriting methods as follows.
*If you want to obtain the latest version of the firmware, you can obtain it from here.
http://www.ti.com/tool/ble-stack
Write firmware using CCS
Import the project in the following directory into CCS and write it.
C:\ti\simplelink\\Projects\ble\SensorTag
CCS is available from:
http://processors.wiki.ti.com/index.php/Download_CCS
Write firmware using Flash Programmer 2
The original image of SensorTag is in the following directory, so write it here.
C:\ti\simplelink\\Accessories\HexFiles
Flash Programmer2 can be obtained from the following.
http://www.tij.co.jp/tool/jp/flash-programmer
How to write firmware
Please refer to the article below.
Let's update SensorTag to the latest F/W -CCS edition-
Let's update SensorTag to the latest F/W -Flash Programmer 2-
Related FAQ
Do you have sample code for SensorTag?
Is it possible to rewrite the SimpleLink SensorTag's firmware to the latest version?
Is it possible to revert the software on the SensorTag side to an older version?
Do you have a track record of operating the SensorTag as a beacon?
Is there a way to output the information acquired by the SensorTag as a serial signal?
Are there any operation confirmation results when connecting with the smartphone app, DEVPACKM-RS232-II&SensorTag for each software and hardware version on the SensorTag side?
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.