Narrow down by specifying conditions
There are currently 4292 hits.
Microchip FPGA: regarding the pinout in the I/O Editor. It cannot be assigned to the pin assigned to "DDRIO" in I/O Editor. Actually, I want to use normal LVCMOS2.5V, but only "LVCMOS18" is listed.
Is ``Default I/O technology:'' in ``I/O settings'' set to ``LVCMOS 1.8V''?
Please follow the steps below on Libero SoC.
1. Select “Project” menu => “Project Settings…”
2. Select "Device settings"
3. Set Default I/O technology in I/O setting to ”LMCMOS 2.5V”
The voltage set in Default I/O technology in I/O setting is Upper limit setting because it applies to
This setting is planned to be adopted "maximum voltage" It is recommended to be set with
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.