Narrow down by specifying conditions
There are currently 4292 hits.
Intel: When using the transceiver with Arria® 10, the assignment of XCVR_VCCR_VCCT_VOLTAGE is required for each channel, how do I set it?
Arria
set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE [value] -to [transceiver I/O pin]
Category: Walkie Talkie
Tools: Quartus® Prime
Device: Arria® 10
Please set as below.
- 1_1V : When VCCT_GXB / VCCR_GXB = 1.12V
- 1_0V : When VCCT_GXB / VCCR_GXB = 1.03V
- 0_9V : When VCCT_GXB / VCCR_GXB = 0.95V
If Assignment is 1_0V with VCCx_GXB = 1.03V, calibration is performed using Cal_code for 1.03V.
If Assignment is 0_9V with VCCx_GXB = 0.95V, calibration is performed using Cal_code for 0.95.
Tools: Quartus® Prime
Device: Arria® 10
Please set as below.
- 1_1V : When VCCT_GXB / VCCR_GXB = 1.12V
- 1_0V : When VCCT_GXB / VCCR_GXB = 1.03V
- 0_9V : When VCCT_GXB / VCCR_GXB = 0.95V
If Assignment is 1_0V with VCCx_GXB = 1.03V, calibration is performed using Cal_code for 1.03V.
If Assignment is 0_9V with VCCx_GXB = 0.95V, calibration is performed using Cal_code for 0.95.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.