Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices LTspice: I set the power supply model to AC 1 in AC analysis, but does that mean a sine wave with an amplitude of 1?
To be precise, it is set to "set the Small Signal reference used in AC analysis to "1" (0 dB)". So if you say "AC 2", the source power and the reference will be 6dB and the display will also be 6dB higher.
(Published in March 2023)
Please feel free to ask us any questions using the inquiry form.
A person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.