Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices Design Support : I hear that HBM (Human Body Model) level measures are taken as ESD protection. In that case, don't you need ESD countermeasures on the board?
No, the HBM level is the level (4KV) of ESD countermeasures that will not break the device even if a person touches it while antistatic measures are in place. On the actual circuit, if there is an external connector, etc., static electricity more than HBM may be applied, so please take appropriate ESD countermeasures. In addition, some interface devices have a high withstand voltage ESD countermeasure of 8KV or 16KV inside the IC, so please select a high withstand voltage ESD product as necessary.
(Published in March 2023)
Please feel free to ask us any questions using the inquiry form.
A person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.