Product Summary
Menlo Microsystems' power relays are power control switch products that utilize their proprietary MEMS technology, "Ideal Switch®". The flagship product, the MM9200, is a high-voltage, high-current SPST (single-pole, single-throw) micromechanical switch. It supports a voltage withstand of 300V and a continuous current of 10A, achieving low on-resistance and high off-isolation in a compact form factor.
Designed to replace conventional electromagnetic relays (EMRs) and solid-state switches, the MM9200 is suitable for power control systems where size, weight, power efficiency, and thermal management are critical. The MM9200 also boasts a switching life of over 10 million cycles and supports high-speed switching of 10 μs.
Product features
■ Compact, lightweight, and supports high-power switching.
Ideal Switch® technology enables compact and lightweight design while handling high voltage and high current. Relays using the MM9200 can reduce volume and weight by more than 90% compared to typical 10A relays.
■ Low power consumption
By employing an electrostatic drive method, the power consumption required to control the switch is reduced. Relays using the MM9200 consume less than 5mW of power, which is 1/150th of that of a typical 10A electromagnetic relay (EMR) and 80% less than that of a solid-state relay (SSR).
■ High-speed switching
It supports high-speed switching on the order of microseconds. The ON/OFF time of a relay using the MM9200 is 30μs, which is more than 1000 times faster than a typical 10A electromagnetic relay (EMR).
■ High reliability due to long lifespan
The MM9200 boasts a lifespan of over 10 million cycles. Relays using the MM9200 achieve more than 100 times the number of cycles compared to typical 10A electromagnetic relays (EMRs).
Product lineup
Menlo Microsystems offers the MM9200 power switch for power control applications.
For more details, please visit the manufacturer's website below.
Power relay
| model number | Switch configuration | maximum voltage | Continuous current | On-resistance | Switching mode |
| MM9200 | SPST | 300V AC Peak / DC | 10A AC RMS / DC | 10mΩ max. | Cold Switching |
MM9110 Power Relay Evaluation Kit
The MM9110 is an evaluation kit for building an evaluation environment for power relays using the MM9200.
Operating principle of the MM9110 Power Relay Evaluation Kit
The MM9110 power relay has five terminals. Three terminals are used for input control (5V, GND, switch control), and two terminals are used for the line side (J2-2: line side, J2-1: load side). A microcontroller controls the internal components and provides protection against hot switching (opening and closing while energized).
Furthermore, as shown in the block diagram, the IGBT, the series-connected MOSFETs, and the MM9200 gate drive are each configured to be isolated.
Target application
Menlo Microsystems power relays are suitable for power control applications requiring high-voltage and high-current switching.
Building automation / Smart buildings
・Emobility such as EVs, railways, ships
Factory equipment, industrial robots
Solar power generation, wind power generation
• Power grid
• Battery system
If you would like to purchase from Macnica-Mouser, please click here
Menlo Microsystems products are available for purchase on Macnica-Mo Macnica user, an online store for semiconductor and electronic components.
If you wish to purchase a product urgently, please consider Macnica-Mouser.
Inquiry / Quotation
If you have any questions or requests for quotations regarding this product, please contact us using the form below.
Menlo Microsystems Manufacturer Information Top
To return to the Menlo Microsystems manufacturer information top page, please click below.