HYPER-AL is a Pico-ITX standard compact embedded CPU board.
Product Summary
- Form Factor: PICO-ITX
- Onboard CPU: Intel® Celeron® N3350
- Memory: DDR3L SDRAM (MAX 8GB)
- Interface: HDMI, LVDS, GbE x2, USB 3.1 x2, Audio, etc.
- Expansion: M.2 A key, M.2 B key, SATA, USB 2.0 x2, RS-232
interface
External dimensions
Product spec
| Specification item | Brief description |
| display | |
| display output | 1 x HDMI ●1 x LVDS (2x10pin, single channel, 24bit) |
| system | |
| maximum memory | One 204-pin 1866/1600MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot (system max. 8GB) |
| graphic controller | ●Intel® HD Graphics Gen9 Low Power, 18 Execution Units ●4K Codec Decode & Encode for HEVC4, H.264, VP8, SVC, MVC |
| I/O interface | |
| CAN bus | ●LAN1: Realtek RTL8111H controller ●LAN2: Realtek RTL8111H controller |
| ethernet | ●1 x 8-bit DIO (2x5 pin, P=2.0) |
| Expansion interface | ●1 x M.2A key 2230 (PCIe, USB) ●1 x M.2B key 2242 (USB, SATA) |
| audio | 1 x HD audio (2 x 5 pin, support 7.1 channel HD audio by AC-KIT-892HD-R10) |
| I/O interface | 1 x Front panel (1 x 8 pin, power LED, HDD LED, power button, reset button) 1 x RS-232 (1x9 pin, P=1.25) 1 x SATA 6Gb/s (w/ 5V SATA PWR) 2 x USB 2.0 (2 by pin header, 2x4 pin, P=2.0) 2 x USB 3.0 (on rear I/O) |
| electric power | |
| power consumption | ●12V@2.36A (Intel® Celeron® N3350 with 8GB 1600MHz DDR3L memory) |
| power supply | ●12V DC input only (DC jack) ●Support AT/ATX mode |
| Operating environment | |
| operating temperature | -20°C ~ 60°C |
| humidity | ●5% ~ 95% (non-condensing) |
| storage temperature | ●-10°C ~ 70°C |
| External dimensions | |
| External dimensions | ●100mm x 72mm |
| weight | |
| weight | ●GW:600g/NW:250gGW:700g / NW:350g |
| expansion slot | |
| expansion slot | 1 x M.2 slot with 2230A key 1 x Full-size PCIe Mini slot (w/ SATA signal, support mSATA |
| SoCs | |
| SoCs | ●Intel® Celeron® N3350 on-board SoC (up to 2.4GHz, dual-core, 2M Cache, TDP=6W) |
| BIOS | |
| BIOS | AMI UEFI BIOS |
datasheet download
Inquiry / Quotation
If you have any questions about this product or would like a quote, please contact us using the form below.