The AD4170-4 is a dc to 50 kHz input bandwidth, low noise, high speed, fully integrated analog front end for precision measurement applications. The AD4170-4 provides output data rates from 7.6 SPS up to 500 kSPS. The device contains a low noise, 24-bit Σ-Δ analog-to-digital converter (ADC) and can be configured to have four differential inputs, or eight single-ended or pseudo differential inputs. An on-chip, low noise gain stage allows small amplitude signals to be interfaced directly to the AD4170-4.
*Manufacturer product page: AD4170-4

■ Applications
・Industrial process control: PLC/DCS modules
- Temperature and pressure measurement
-High-precision medical and scientific equipment
Chromatography
Seismic and energy exploration
Electronic test and measurement
・Acoustic analysis
Measuring instruments
・Weight scale

■ Evaluation board
・ EVAL-AD4170-4ARDZ
・ EVAL-SDP-CK1Z

The AD4052 is a versatile 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) that enables low power, high density data acquisition solutions without sacrificing accuracy. This ADC offers a unique balance of performance and power efficiency with the innovative ability to seamlessly switch between high resolution and low power modes to meet the immediate needs of the system. The AD4052 is ideal for compact, battery-powered data collection and edge sensing applications.

The Easy Drive feature enables highly efficient Analog Front End (AFE) design. The small sampling capacitor (3.4pF) maximizes input impedance, reducing reliance on high bandwidth, power hungry amplifiers typically required by SAR ADCs. The wide input common mode range inherently supports both differential and single-ended signals.
*Manufacturer product page: AD4052

■ Applications
Battery-powered data collection
・Vital signs monitoring
Biological and chemical analysis
Geological and earthquake sensing
・Motion and Robotics

■ Evaluation board
・ EVAL-AD4052-ARDZ

The AD4857 is a 16-bit, 1 MSPS data acquisition system (DAS) that simultaneously samples eight fully buffered channels. It has differential inputs with a wide common-mode voltage range. The AD4857 operates from a low voltage 5 V supply, flexible input buffer supplies, and uses a precision low drift internal reference and reference buffer. The AD4857 allows the user to independently configure the SoftSpan range of each channel to match the native signal swing of the application, minimizing the need for additional external signal conditioning. To further maximize the single conversion dynamic range, the AD4857 incorporates Seamless High Dynamic Range (SHDR) technology. When enabled, the input signal path gain of the channel is automatically optimized on a sample-by-sample basis, minimizing the converter noise of each sample without affecting linearity.
*Manufacturer product page: AD4857

■ Applications
ATE (Automatic Test Equipment)
Avionics and aerospace
- Instrumentation and control systems
・Semiconductor manufacturing
Testing and measurement

■ Evaluation board
・ EVAL-AD4857FMCZ

The LT8440 is a power conditioner for safe industrial Ethernet ports, used in hazardous and explosive environments. The internal pass transistor is enhanced to efficiently power the load. In the event of a load circuit failure, the FET adjusts to limit power to less than 650mW for line voltages ≤18.5V and less than 35mA for line voltages >18.5V. The internal shunt transistor draws current in parallel with the load up to the minimum guaranteed 500mW for Class A load power ports according to the Advanced Physical Layer (APL) standard, or 20mA for line voltages >18.5V. The line voltage is sensed at two polarity-independent input pins. These pins can be connected before the port rectifiers, allowing the rectifier power dissipation to be factored into the total power limit. The line current is measured as the voltage across an internal sense resistor, and the shunt current and current limit are automatically adjusted according to the line voltage.
*Manufacturer product page: LT8440

■ Applications
・Industrial Ethernet
- Advanced Physical Layer
- Current limiting

■ Evaluation board
EVAL-LT8440-AZ

The LT8342 is a low IQ synchronous step-up DC/DC converter. The device features Silent Switcher architecture and optional spread spectrum frequency modulation that delivers high efficiency at high switching frequencies while minimizing radiated electromagnetic interference (EMI). Output short circuit protection and inrush current reduction are optional.

The wide input and output voltage ranges, low VIN pin quiescent current in Burst Mode operation and 100% duty cycle capability of the synchronous MOSFET during PassThru operation (VIN ≥ VOUT) make the LT8342 ideal for general purpose boost and automotive pre-boost applications.
*Manufacturer product page: LT8342

■ Applications
Automotive and industrial power supplies
・General-purpose boost

■ Evaluation board
・ EVAL-LT8342-AZ

The LTM4682 is a quad 31.25A or single 125A step-down power μModule® (power micromodule) DC/DC regulator. It features remote configuration via PMBus and telemetry monitoring of power management parameters. The LTM4682 consists of a digitally programmable analog control loop optimized for higher bandwidth and transient response.
*Manufacturer product page: LTM4682

■ Applications
・Multi-rail processor power supply
・Configurable core power supply

The ADXL380 is a low noise density, low power 3-axis accelerometer with selectable measurement ranges. The ADXL380 is available in ±4g, ±8g, and ±16g ranges. The ADXL380's industry-leading noise performance enables precision applications with minimal calibration. The low noise and low power ADXL380 allows accurate measurement of audio signals and heart sounds, even in high vibration environments.
*Manufacturer product page: ADXL380

■ Applications
- Audio and Active Noise Cancellation (ANC)
·robot
Wearable, low power motion detection
・Seismic image processing
Condition-based maintenance

■ Evaluation board
・ EVAL-ADXL380-EB-1Z: SPI
・ EVAL-ADXL380-EB-2Z: I2C
・ EVAL-ADXL380-BB-1Z: SPI breakout board
・ EVAL-ADXL380-BB-2Z: I2C breakout board

The ADXL382 is a low noise density, low power 3-axis accelerometer with selectable measurement ranges. The ADXL382 supports ±15g, ±30g, and ±60g ranges. The ADXL382's industry-leading noise performance enables precision applications with minimal calibration. The low noise and low power ADXL382 allows accurate measurement of audio signals and heart sounds, even in high vibration environments.
*Manufacturer product page: ADXL382

■ Applications
- Audio and Active Noise Cancellation (ANC)
·robot
Wearable, low power motion detection
・Seismic image processing
Condition-based maintenance

■ Evaluation board
・ EVAL-ADXL382-EB-1Z: SPI
・ EVAL-ADXL382-EB-2Z: I2C
・ EVAL-ADXL382-BB-1Z: SPI breakout board
・ EVAL-ADXL382-BB-2Z: I2C breakout board

The ADuM4195-1 is an isolation amplifier based on Analog Devices' iCoupler® technology. The ADuM4195-1 has very low offset and gain errors, making it suitable for a variety of isolated voltage sensing applications.

Unlike optocoupler-based solutions, which have an indeterminate current transfer ratio over lifetime and are unstable at high temperature, the transfer function of the ADuM4195-1 does not change over its lifetime and is stable over a wide temperature range of −40°C to +125°C.
*Manufacturer product page: ADuM4195-1

■ Applications
·inverter
・DC/DC converter
・Car charger

■ Evaluation board
・ EVAL-ADuM4195-1EBZ

The ADG6436 is an analog multiplexer consisting of two independently selectable single-pole, double-throw (SPDT) switches. All switches can be disabled using the EN input. When used in multiplexer applications, both switches exhibit break-before-make switching action.

When on, each channel can conduct equally well in both directions, and each switch can accept input signals ranging from V _SS to V _DD − 2 V. When the switch is disabled, it blocks signal levels up to the supply voltage.
*Manufacturer product page: ADG6436

■ Applications
ATE (Automatic Test Equipment)
Data Acquisition
Measuring instruments
・Avionics (avionics equipment)
・Audio/video switching
・Communication systems
・Relay part replacement

■ Evaluation board
EVAL-ADG6436EBZ

The ADG2436 is an analog multiplexer consisting of two independently selectable single-pole, double-throw (SPDT) switches. All switches can be disabled using the EN input. When used in multiplexer applications, both switches exhibit break-before-make switching action.

When on, each channel can conduct equally well in both directions, and each switch can accept input signals ranging from V _SS to V _DD − 2 V. When the switch is disabled, it blocks signal levels up to the supply voltage.
*Manufacturer product page: ADG2436

■ Applications
ATE (Automatic Test Equipment)
Data Acquisition
Measuring instruments
・Avionics (avionics equipment)
・Audio/video switching
・Communication systems
・Relay part replacement

■ Evaluation board
EVAL-ADG2436EBZ

The MAX22663 is a six-channel, reinforced, high-speed, low-power digital isolator utilizing Analog Devices' proprietary process technology. All devices feature reinforced isolation with a 5kVRMS withstand rating for 60 seconds. Automotive and general purpose devices are rated to operate from -40°C to +125°C ambient temperature. Devices with a "/V" part number suffix are AEC-Q100 qualified.
*Manufacturer product page: MAX22663

■ Applications
・In-vehicle
- Hybrid electric vehicles
- Charger
- Battery Management System (BMS)
- Inverter