Narrow down by specifying conditions
現在1888件がヒットしています。check
Overview
Crystal Oscillators (XOs) are essential ICs for high-performance electronic devices and are used in a wide range of products from low-end applications (e.g. real-time clocks) to high-end applications (e.g. complex radios, GPS). . In particular, IoT devices in recent years are required to support high-speed, large-capacity communication and low latency, and the requirements for crystal oscillators are becoming more sophisticated.
To meet these demands, since 2012, Texas Instruments (TI) has been developing its own Bulk Acoustic Wave (BAW) resonator technology for demanding applications. , the industry's highest performance jitter cleaner (LMK05318 family) and commercial crystal-less wireless microcomputers (CC2652RB family).
TI has released a new BAW-based oscillator, the LMK6 series, by making use of the technological capabilities it has cultivated over the years.
* BAW is explained in detail in this article. Open the "Embedded Technology Lab" site.
Features
・Ultra-low jitter characteristics: less than 100fs (Conditions: 156.25MHz (LVPECL output), offset frequency: 12kHz to 20MHz)
・Excellent temperature characteristics: Less than ±10 ppm over the entire temperature range (-40 to 105°C)
Quote: https://www.ti.com/lit/an/snaa374/snaa374.pdf
・Excellent vibration resistance: Frequency deviation less than 2ppb/g (Condition: 50Hz to 2kHz vibration test)
Quote: https://www.ti.com/lit/an/snaa374/snaa374.pdf
TI Oscillator Product List
Introducing the product lineup of oscillators.
New product "LMK6PA15625ADLE" specifications
Introducing the specifications of the new product "LMK6PA15625ADLE".
|
frequency |
156.25MHz |
|
Frequency accuracy |
±25ppm |
|
RMS jitter |
less than 100fs (Conditions: 156.25MHz (LVPECL output), offset frequency: 12kHz to 20MHz) |
|
Output format |
LVPECL |
|
Power supply voltage range |
1.8V、2.5V、3.3V |
|
Built-in LDOs |
PSRR: -75dB (condition: 500kHz ripple condition) |
|
temperature range |
－40℃～85℃ |
|
package |
VSON-6pin(DLE-6) 3.20mm×2.50mm |
Hardware Evaluation Environment (EVM)
LMK6EVM
Click the EVM photo to view the evaluation board from Macnica-Mouser.
Inquiry
If you have any questions or concerns regarding the LMK6 series, please contact us using the form below. the Company product representative will get back to you.
