Features of the compact Wi-Fi module BP3595

"BP3595" is a compact Wi-Fi module with built-in antenna provided by ROHM, and has the following features.

  • 2.4GHZ
  • IEEE802.11b/g/n compliant
  • IEEE802.11i (security standard)
  • TCP/IP protocol stack can be installed (UART I/F)
  • Small size (15.3mm×27.6mm)
  • Built-in antenna
  • 3V single power supply
  • Equipped with USB, SDIO, and UART interfaces
  • Operating temperature: -40~85 degrees


Therefore, it is ideal for applications such as cooperation with smart home appliances, surveillance cameras, smartphones, and tablets.

Article header original image sample 774x203 11 1
Constitution

Reliable long-term supply

All ROHM Wi-Fi modules are manufactured in Japan. In addition, baseband LSIs, modules, and software are all produced by ROHM.

As a result, we are able to provide long-term supply even when the production of key devices is discontinued.

Article header img bp3595 1

Only 15.3mm x 27.6mm with built-in antenna

The "BP3595" module is equipped with a chip antenna. Therefore, the user does not need to do any external antenna design. High frequency design for external antenna installation is not required.

In addition, despite its extremely small size of 15.3mm x 27.6mm, the BP3595 alone can be used as a Wi-Fi module. This makes them ideal for space-constrained applications such as smart home appliances and surveillance cameras.

Radio certified in Japan

"BP3595" has acquired radio wave certification in Japan. Therefore, there is no need for users to newly acquire radio wave certification in Japan.

Since the cost and period for radio wave certification can be shortened, mass production of products can be started immediately after product development.

*Specified radio equipment type: Article 2, Paragraph 1, Item 19, Radio Equipment, 2.4 GHz Band Advanced Low Power Data Communication System” and “Construction Design Certification” (Article 38-24, Paragraph 1 of the Radio Law) have been obtained. am.

Built-in TCP/IP stack eliminates the need for driver development (UART I/F)

If the "BP3595" Wi-Fi module interfaces with the host microcontroller via UART, ROHM provides firmware with a built-in TCP/IP protocol stack. Therefore, wireless LAN device driver development is unnecessary.

In addition to the TCP/IP stack, it also has authentication processing and WPS functions, and since network processing can be processed on the module side, there is no load on the host.

Therefore, Wi-Fi can be installed in applications that were difficult to install due to lack of host resources.

In addition, since there is no need for driver development, the development period can be greatly shortened.

Article header original image sample 774x203 12 1
Software configuration

* Supplicant = software that processes authentication, encryption, etc. that conforms to wireless LAN standards

Evaluation kit for immediate operation check

The BP3595 comes with an evaluation kit that allows immediate evaluation by connecting to a PC. The equipment required for evaluation is as follows.

  • 1 PC
  • BP3595 (Wi-Fi module)
  • BP359F (adapter board)
  • BP359C (UART I/F board)


After that, you can start evaluating the Wi-Fi module immediately by downloading the sample program from ROHM's website.

Article header original image sample 774x203 13 1
Evaluation kit

Application example

  • digital consumer electronics
  • AV equipment
  • sensor network
  • home network
  • smartphone, tablet
Article header original image sample 774x407 38 1
Application example

Product Summary

Type name BP3595
Wireless LAN standard IEEE802.11b / IEEE802.11g / IEEE802.11n / IEEE802.11i
host interface UART (~921600bps)
SDIO Ver.2.00 (High-Speed mode)
USB2.0 (High-Speed mode)
Transmission/reception frequency 2,400MHz to 2,483.5MHz (ch1 to ch13)
transmission power IEEE802.11b: 15dBm±2dB
IEEE802.11g: 13dBm±2dB
IEEE802.11n: 12dBm±2dB
communication speed IEEE802.11b: 1-11Mbps
IEEE802.11g: 6-54Mbps
IEEE802.11n: 6.5-72.2Mbps
access method CSMA/CA
access mode infrastructure / ad hoc
Security 64bit/128bit WEP, TKIP, AES
Power-supply voltage 3.3V
current consumption During transmission: Continuous transmission: 300mA Typ.
When receiving: When receiving: 200mA Typ.
Sleep: 1mA Typ.
Operating environment Temperature: -40°C to +85°C
Humidity: 85% or less (no condensation)



Click here to purchase products

BP3595

Click here for manufacturer site/other related links

BP3595 Product Information
ROHM Wi-Fi Series Support Page

Inquiry