4-20mA
4-20mA communication is a robust and reliable communication protocol that has been widely used in industrial equipment settings for many years. Product categories include A/D converters for 4-20mA communication, D/A converters, HART interfaces and industrial 4-20mA drivers.
Automotive Interface (CAN, Audio)
Automotive interfaces combine connectivity and mobility, delivering sound and data throughout the vehicle. The product categories include A 2 B ® (Automotive Audio Bus ®), isolated CAN (Controller Area Network), and non-isolated CAN (Controller Area Network).
Low-latency 50Mbps communication with reduced wiring! Analog Devices' New Serial Bus "A2B"
IO-Link®
Analog Devices provides solutions for IO-Link ® Device PHY and Master PHY interfaces (COM1/COM2/COM3). The master PHY operates from 8V to 30V, can be connected with a cable up to 20m, and provides a 4-port IO-Link ® power and communication interface. The device PHY has a high operating voltage range of 40V and includes a buck regulator to power MCUs, sensors or actuators.
Digital isolation technology
With innovative technology based on iCoupler ® digital isolation ICs and µModules, we offer a wide product portfolio including:
I2C Isolator, Isolated A/D Converter, Isolated CAN (Controller Area Network), Isolated Gate Driver, Isolated LVDS, Isolated RS-232, Isolated RS-485, Isolation Amplifier (Isolation Amplifier) , isoPower, SPI Isolator, Standard Digital Isolator, μModule Isolated Transceiver, USB Isolator
EMC Surge Protection Level 4, Fully Tested RS-485 Transceiver ADM2795E
Isolated SPI controller that can be extended up to 100m in harsh noise environments
Intrinsically safe certification acquired at the component level! Digital Isolator ADuM144x Series
level converter
We offer the most flexible level translation solution in the industry. Products that enable bi-directional data transfer, products that enable conversion over a wide range from 1.65 V to 3.6 V, and products that enable bi-directional data transfer while also enabling up/down conversion from 1.2 V to 5.5 V. We have a wide range of products.
LVDS/MLVDS
Our LVDS transmitter/receiver portfolio includes LVDS transceivers that meet 8kV performance criteria in IEC ESD testing, and our isolated LVDS products with iCoupler ® technology are capable of data rates over 600 Mbps. MLVDS (Multipoint LVDS) products are ideal for applications that need to transmit data to multiple nodes at data rates up to 100Mbps or 200Mbps.
Mobile I/O Expander & Keypad Controller
The family of mobile I/O expanders are suitable for mobile device designs requiring large extended keypads and extended I/O. It offloads the CPU from key scan and GPIO functions, leaving the processor to higher priority functions while reducing power consumption.
Multiprotocol transceiver
The RS-232/RS-485 multiprotocol transceiver is the only one on the market that offers protocol switching, allowing half/full duplex operation and switching termination resistors on/off. It also supports legacy protocols V.28 (RS-232), V.35, RS-449, RS-530, RS-530-A, V.36, X.21 and more.
RS-232, RS-422, RS-485
Analog Devices offers a wide range of RS-232, RS-422, RS-485, and RS-562 transceivers for non-isolated interface applications as well as digital isolation using iCoupler ® technology.
I2C & SMBus Bus Buffers, Accelerators & Multiplexers
The I2C solution family is a 2-wire bi-directional bus buffer that can be hot-swapped to protect the data bus and clock bus from corruption. Other two-wire buses include SMBus, PMBus, ATCA Intelligent Platform Management Bus (IPMB) and HDMI DDC Bus.
FAQ
A collection of frequently asked questions about Analog Devices interface and isolator products.
If you have any trouble with the technical content, please check the FAQ or ask a question from the inquiry form below.
Interface & Isolator Product FAQ
Click here for parts selection request
Please feel free to contact us using the form below.
The person in charge of products at Analog Devices will answer your question.