Site Search

Use the ultra-low power consumption and small size of the CEM102 to develop wristwatch-sized sensor applications that can be used for a long time!

Product Summary

The CEM102 is an Analog Front End (AFE) product specifically developed for applications such as Continuous Glucose Monitoring (CGM) and other amperometric measurements that require the detection of very small currents.

The CEM102 is designed to be paired with ON Semiconductor's RSL15, an Arm® Cortex®-M33 processor-based Bluetooth® Low Energy 5.2 wireless SoC, and operates with the RSL15 at extremely low power consumption, extending battery life.
In addition, the power supply voltage range is wide, from 1.3 to 3.6 V, so it can operate on either a 1.5 V silver oxide battery or a single​ ​3 V coin battery.

The CEM102 also has an evaluation board, which contains the CEM102 as well as the RSL15.
It also includes example code for setting up the CEM102 and running measurements, facilitating system and firmware development.

Main features/functions

Flexible configuration: can operate with 1, 2, 3 or 4 electrodes
<Configuration>
Working electrode: 2 pieces
Reference Electrode: 1
Counter Electrode: 1

- The bias voltages of the reference electrode and two working electrodes can be set independently using three 12-bit DACs.

- Extremely low system current consumption
Shutdown: 0.05uA
2-electrode configuration: 2uA
Active measurement mode with 18-bit ADC continuously converting: 3.5uA

・WLCSP Package
Small footprint: 1.884mm x 1.848mm package

Low power consumption

The chart below shows a comparison with similar devices from other companies.
It also consumes less current than similar devices from other companies.

Evaluation boards available

We offer an evaluation board that combines the RSL15, an ultra-low power Arm® Cortex®-M33 processor-based Bluetooth® Low Energy 5.2 wireless SoC.
By combining it with RSL15, low power consumption can be achieved for the entire system.
Additionally, the necessary firmware modules are already installed in the RSL15 and sample code is provided, making design easy.
RSL15 LINK: https://www.macnica.co.jp/business/semiconductor/manufacturers/onsemi/products/142478/

Application example

Wearables
・IoT sensor devices
・Continuous glucose monitoring (CGM)

Inquiry

If you are interested in any of the products introduced in this article, please feel free to contact us.

Onsemi Manufacturer information Top

If you want to go back to ONSEMI Manufacturer Information Top, please click below.