Category: Tools
Tools: Quartus® Prime Pro Edition 22.2
device:-

[Warning] The installer unzip <qdz_path>. First make sure the file isn't corrupted during download, you can do this by confirming whether the md5sum of the matches what's on the download page.

This issue occurs when you install additional device information from Tools menu > Install devices for Quartus® Prime Pro Edition 22.2 on Linux OS.
It does not occur if device information is installed with Quartus® Prime Pro Edition 22.2 or on Windows OS.

First, check the SHA1 hash value of the previously downloaded file for corruption.
The hash value of each file is published on the FPGA Software Download Center.

https://www.intel.com/content/www/us/en/software-kit/734897/intel-quartus-prime-pro-edition-design-software-version-22-2-for-linux.html

Please see the following content for how to check the SHA1 hash.
■ How to Download the Intel Quartus Prime Software and Questa - Intel FPGA Edition
*See "Checking the SHA1 hash value".

After confirming that it is not corrupted, close the Quartus® Prime Pro Edition GUI and start the Device Installer by following the steps below.

(1) Expand the "Quartus® Prime Pro Edition 22.2 installation folder" > common > devinfo > dev_install folder.

(2) Run dev_install.run.

(3) The GUI for the device installer will start.

(4) Follow the instructions of the installer, specify the desired *.qdz and complete the installation.