Narrow down by specifying conditions
There are currently 4292 hits.
Intel: Attempting to run the Board Test System on the Cyclone® 10 GX Development Kit results in an error. The connection with the board uses the J9 connector (Embedded Intel FPGA Download Cable II).
Category: Development Kit
Tools: Quartus® Prime
Device: Cyclone® 10 GX
<Error message>
Fail to read production information from this SOF in the FPGA.
Changing the TCK frequency of JTAG to a lower frequency may improve it, so please try it.
<Procedure>
1. Change the TCK frequency by referring to the article below
[Let's change the TCK frequency of USB-Blaster™ II]
https://www.macnica.co.jp/business/semiconductor/articles/intel/130581/
2. Leave the Programmer running and run BoardTestSystem
(*When the Programmer is closed, the set frequency returns to the initial setting.)
3. Select the desired design from Configure and Configure
(*Since the TCK frequency is lowered, the configuration time will be longer.)
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.