Specifications and Features of NCP730

・Input voltage: 2.7V to 38V
・Low quiescent current[Iq] : 1µA typ
・Built-in soft start circuit
・ Power Good with output (Ver B)
・Fixed output products and variable output products
・Voltage accuracy: ± 1% @ Tj : -40 to +85ºC
・Drop voltage 290mV typical [150mA, 3.3Vout]
・Short circuit protection, Thermal shutdown protection
・ 1uF Stable operation with a ceramic capacitor of
·package: TSOP-5 and WDFN6 (2x2)

NCP730 block diagram

The very low quiescent current of 1uA makes it ideal for battery powered applications.
The figure below is a graph showing the change in quiescent current with respect to input voltage. (Vout=3.3V, Iout=0mA.)
It can be seen that it always maintains a very low quiescent current even when the input voltage changes.

Another advantage of the NCP730 is its fast transient response.
The figure below shows the output voltage waveform when the load current Iout is varied from 1mA to 150mA at an output voltage of 3.3V.

The value of the output capacitor is as small as 1uF, but the voltage fluctuation is within a very small range of several tens of mV to 100mV.
Therefore, it can be supplied to loads that require strict voltage accuracy while current changes due to the load.

The ONSEMI LDO NCP730 introduced this time features a wide input voltage range, low quiescent current, and fast transient response.

If your application has such requirements, please consider it.

ONSEMI also handles LDOs with various other features.

LDO product page

If you are looking for LDO products, please check the product page of the ONSEMI website below.

Inquiry / Quotation

If you have any questions about this product or would like a quote, please contact us using the form below.