Product Summary
NVIDIA® Jetson Orin™ Nano uses the NVIDIA Ampere architecture GPU to deliver performance that defies conventional entry-level edge AI in a small, power-efficient form factor. Delivering up to 80x performance improvement over the previous generation NVIDIA® Jetson Nano™, enabling ever more complex AI models across low-cost consumer products, retail analytics, factory quality inspection equipment and more. you will be able to use it.
NVIDIA Jetson Orin Nano Module
Jetson Orin Nano series module products deliver AI performance up to 40 TOPS in the smallest Jetson™ form factor and are configurable with power consumption from 7W to 15W. It's also pin-compatible with NVIDIA Jetson Orin™ NX for fast IO and NVIDIA Ampere architecture GPUs to run multiple AI application pipelines simultaneously.
NVIDIA Jetson Orin Nano Developer Kit
The Jetson Orin Nano Developer Kit consists of a Jetson Orin Nano 8GB module and a reference carrier board, which can accommodate all Orin Nano and Orin NX modules. AI performance up to 40 TOPS enables the execution of the latest AI models, including advanced robotics models, accelerating the development of AI-powered robots, smart drones, intelligent cameras, and more.
Product Specifications
Jetson Orin Nano Module Spec Table
|
|
Jetson Orin Nano 4GB |
Jetson Orin Nano 8GB |
|
AI performance |
20 TOPS |
40 TOPS |
|
GPUs |
512-core NVIDIA Ampere architecture GPU with 16 tensor cores |
1024-core NVIDIA Ampere architecture GPU with 32 tensor cores |
|
GPU max frequency |
625MHz |
|
|
CPU |
6-core Arm® Cortex®-A78AE v8.2 64-bit CPU 1.5MB L2 + 4MB L3 |
|
|
CPU maximum frequency |
1.5GHz |
|
|
Memory |
4GB 64-bit LPDDR5 34GB/s |
8GB 128-bit LPDDR5 68GB/s |
|
storage |
- (Supports external NVMe) |
|
|
Camera |
Up to 4 cameras (8 via virtual channels*) 8 MIPI CSI-2 lanes D-PHY 2.1 (up to 20Gbps) |
|
|
video encoding |
1080p30 supported by 1-2 CPU cores |
|
|
video decoding |
1x 4K60 (H.265) |
|
|
PCIe |
1x4 + 3x1 (PCIe Gen3, Root Port, and Endpoint) |
|
|
USB |
3x USB 3.2 Gen2 (10Gbps) 3x USB 2.0 |
|
|
Network |
1xGbE |
|
|
display |
1x 4K30 multi-mode DP 1.2 (+MST)/eDP 1.4/HDMI 1.4 |
|
|
Other I/O |
3x UARTs, 2x SPI, 2x I2S, 4x I2C, 1x CAN, DMIC & DSPK, PWM, GPIOs |
|
|
Power Consumption |
7W - 10W |
7W - 15W |
|
size and connector |
69.6mm x 45mm 260-pin SO-DIMM connector |
|
* Information about cameras on virtual channels on Jetson Orin Nano may change in the future.
** See "Software Features" in the latest NVIDIA Jetson Linux Developer Guide for a list of supported features.
Jetson Orin Nano developer kit specification table
|
GPU |
NVIDIA Ampere Architecture with 1024 CUDA Cores and 32 Tensor Cores |
|
CPU |
6-core Arm® Cortex®-A78AE v8.2 64-bit CPU 1.5 MB L2 + 4 MB L3 |
|
memory |
8GB 128-bit LPDDR5 68 GB/s |
|
storage |
Supports SD card slot and external NVMe |
|
video encoding |
Supports 1080p30 on 1-2 CPU cores |
|
video decoding |
1x 4K60 (H.265) 2x 4K30 (H.265) 5x 1080p60 (H.265) 11x 1080p30 (H.265) |
|
power consumption |
7 W ～ 15 W |
*For a list of supported features, please refer to the Software Features section of the latest NVIDIA Jetson Linux Developer Guide.
Reference carrier board
|
camera |
MIPI CSI-2 22 pin camera connector x 2 |
|
PCIe |
PCIe Gen3 x4 M.2 Key M slot M.2 Key M slot with PCIe Gen3 x2 M.2 Key E slot |
|
USB |
USB Type-A Connector: USB 3.2 Gen2 x 4 USB Type-C connector (UFP) |
|
network |
1 x GbE connector |
|
display |
1 x DP 1.2 (+MST) connector |
|
OtherI/O |
40-pin expansion header (UART, SPI, I2S, I2C, GPIO) 12 pin button header 4 pin fan header microSD slot DC power jack |
|
size |
100 mm x 79 mm x 21 mm (height including feet, carrier board, module and cooling solution) |
Case study
Jetson related articles
Articles to Read Before Buying a Developer Kit
Article for those with developer kits
Contact Us
*This form is for corporations only. If you wish to pay by non-corporation or credit card, please check the arrival list on the Switch Science website.quest is possible.
Clicking on the product name below will take you to the Switch Science website.