MEMS switch
RF-MEMS switches offer excellent RF performance from 0 Hz (DC) to 14 GHz. It operates at low power and has a parallel logic interface.
It also supports standard drive voltages for CMOS logic and uses a compact (5 x 4 mm) LFCSP package.
From mechanical relays to MEMS switch "ADGM1004" 4 reasons to consider
Analog switches & multiplexers
Analog Devices offers a line of dual-supply analog switches and multiplexers that operate over a voltage range of ±2.5V to ±22V and single-supply analog switches and multiplexers that operate over a voltage range of 1.65V to 44V. increase.
Buffered Analog Crosspoint Switch
Buffered analog crosspoint switches are ideal for routing relatively slow analog data.
Buffered Analog Multiplexer
Buffered multiplexers have two (2:1) or four (4:1) inputs and one to three output channels. Very high speed multiplexers available for systems with 50Ω or 75Ω impedance.
Digital crosspoint switch
For digital switches, we offer the X-stream™ family, which includes high-speed crosspoint switches and multiplexer/demultiplexer switches. Digital crosspoint switches are recommended for routing high-speed digital data above several GHz
RF switch
Manufactured in GaAs and silicon (SOI) processes, RF switches can handle higher power, have better linearity, and operate over a wider frequency band than CMOS switches. Analog Devices silicon (SOI) RF switches offer low insertion loss, good isolation, wide bandwidth, and fast switching/settling times.
ADIsimRF™ (RF Signal Chain Calculator)
ADIsimRF™ is an easy-to-use RF signal chain calculator. Cascade gain, noise figure, IP3, P1dB, and power consumption can be calculated. You can change the number of stages up to 20. Stages can be easily inserted, removed or temporarily muted.
You can download the ADIsimRF™ installer from the link below.
level converter
We offer the most flexible level translation solution in the industry. Products that enable bi-directional data transfer, products that enable conversion over a wide range from 1.65 V to 3.6 V, and products that enable bi-directional data transfer while also enabling up/down conversion from 1.2 V to 5.5 V. We have a wide range of products.
Reliable Switches & Multiplexers
High-reliability switches and multiplexers offer enhanced overvoltage protection, power-off protection, high ESD, and latch-up immunity. Fault protection & detection switches and multiplexers provide up to ±60V overvoltage protection for system inputs and outputs, signal chain inputs and outputs, and in signal chains where overvoltage conditions may occur.
Unbuffered Analog Crosspoint Switch
Unbuffered analog crosspoint switches can be used for routing analog data at relatively high speeds (around 1 GHz).
FAQ
A collection of frequently asked questions about Analog Devices' switch and multiplexer products.
If you have any trouble with the technical content, please check the FAQ or ask a question from the inquiry form below.
FAQ for Switch & Multiplexer Products
Click here for parts selection request
Please feel free to contact us using the form below. Please feel free to contact us using the form below.
The person in charge of products at Analog Devices will answer your question.