Narrow down by specifying conditions
There are currently 4292 hits.
Texas Instruments CC2650STK: Are there any operation confirmation results when connecting with the smartphone app, DEVPACKM-RS232-II & SensorTag for each software and hardware version on the SensorTag side?
We have confirmed the operation of each version as follows.
If you are using the iOS app, please use version 1.30 or earlier.
For information on where to obtain the old version, please refer to here (Is it possible to revert to the old version of the software on the SensorTag side?).
SensorTag App (iOS)
| Hardware | Remarks column | |||
| 1.2 | 1.3.x | |||
| Software | 1.2 | ○ | ○ | Operation has been confirmed |
| 1.3 | ○ | ○ | Operation has been confirmed | |
| 1.32 | △ | △ | App v4.95 has problems with behavior and some sensor values. | |
| 1.4 | △ | △ | App v4.95 has problems with behavior and some sensor values. | |
SensorTag App (Android)
| Hardware | Remarks column | |||
| 1.2 | 1.3.x | |||
| Software | 1.2 | ○ | ○ | It can be connected, but there is a problem with the barometric pressure sensor value in App v4.05. |
| 1.3 | ○ | ○ | It can be connected, but there is a problem with the barometric pressure sensor value in App v4.05. | |
| 1.32 | ○ | ○ | It can be connected, but there is a problem with the barometric pressure sensor value in App v4.05. | |
| 1.4 | ○ | ○ | It can be connected, but there is a problem with the barometric pressure sensor value in App v4.05. | |
DEVPACKM-RS232-II&SensorTag
* It is assumed that DEVPACKM-RS232-II (expansion board) and SensorTag are used as a set. Let the SensorTag set on the expansion board be the Central side, and the SensorTag connected to it be the Peripheral side. The following results are the results of the Peripheral side SensorTag.
| Hardware | Remarks column | |||
| 1.2 | 1.3.x | |||
| Software | 1.2 | × | × | I don't get the expected behavior because the handles are different |
| 1.3 | ◎ | ◎ | Recommended F/W | |
| 1.32 | ○ | ○ | Operation has been confirmed | |
| 1.4 | ○ | ○ | Operation has been confirmed | |
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.