Narrow down by specifying conditions
There are currently 4292 hits.
Texas Instruments CC2650STK: Receives no motion sensor data for only a few seconds or none when evaluated using the SensorTag app for Android.
2016/6/1
- With the update on June 1, 2016, the motion sensor is now working properly.
After updating the Android app, remove the CC2650STK battery, let it fully discharge, and then insert the battery again.
2016/5/20
There is a possibility that there is a problem with the Android application provided by TI, and it is currently under investigation. We apologize for the inconvenience, but we have confirmed that the app for iPhone/iPad works without any problems, so please rate it here.
The Android sample code is available below, so you can get the code from the URL below and modify it yourself.
https://git.ti.com/sensortag-20-android
Related article
If the SensorTag is left unconnected, the power will be turned off. Are there any countermeasures?
When using the SimpleLink SensorTag, some sensors do not work properly. What should I do?
While using the SimpleLink SensorTag, I could or could not establish a BLE connection, or the operation became unstable. What should I do?
While using the SimpleLink SensorTag, the LED flashed for a moment, but then lost the BLE connection. What should I do?
When using SensorTag with an Android application (version: 4.05), it seems that barometric sensor data is not correctly obtained. Please tell me what to do.
After updating the SensorTag firmware to the latest version (1.4), the update request and sensor values are strange in the iOS app. Please tell me what to do.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.