Microchip FPGA: Regarding the On-chip 25/50 MHz RC Oscillator setting of Chip Oscillators IP, in the case of IGLOO2, which is 25MHz or 50MHz?

Narrow down by specifying conditions

There are currently 4332 hits.

Microchip FPGA: Regarding the On-chip 25/50 MHz RC Oscillator setting of the Chip Oscillators IP, which is 25MHz or 50MHz for IGLOO2?

IGLOO2 IP Libero SoC Clock/CCC

It will be 50MHz.

Reference:
The following is stated in the "IGLOO2/SmartFusion2 Clock Conditioning Circuit with PLL Configuration Clock Frequency Requirements" section.
Quote: "・The On-chip 25/50MHZ Oscillator clock frequency is fixed to 50 MHz when the core voltage is 1.2V and 25 MHz when the core voltage is 1.0V and cannot be changed."
https://coredocs.s3.amazonaws.com/Actel/SgCore/CCC/sf2_ccc_config_ug_1.pdf#page=19

The core voltage of IGLOO2 will be 1.2V.
The core voltage can be found in the "Operating Voltage and I/Os" section of the IGLOO 2 FPGA Product Brief.
Quote "・1.2V core voltage"
https://www.microchip.com/content/dam/mchp/documents/FPGA/ProductDocuments/ProductBrief/PB0121%20IGLOO2%20FPGA%20Product%20Brief.pdf#page=4

(If the link is broken, go to https://www.microchip.com/en-us/products/fpgas-and-plds/fpgas/igloo-2-fpgas and go to the Documentation > Overviews tab to access the IGLOO 2 FPGA Product Brief.)

FPGA related materials summary page

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search