After evaluating MachXO2, I found some margin in logic usage, so I would like to change to a pin-compatible product with smaller logic size. Is there anything I should be careful about?

Narrow down by specifying conditions

There are currently 4342 results.

Since the evaluation of the MachXO2 has shown some leeway in the logic usage rate, I would like to change to a pin-compatible product with a smaller logic size. Is there anything I should be aware of?

I/O MachXO Series

Category: I/O
tool:-
Device: MachXO2

When changing (migrating) from a device with a large logic size to a device with a small logic size, some pins may become unusable (the number of Non Connect pins increases). See and compare the Pinout documentation to see if all the pins on your small device are available.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search