I want to receive a clock in LVDS from a dedicated clock input pin on my Cyclone V device. Does the FPGA have a built-in 100 Ω differential termination resistor on the dedicated clock input pin?

Narrow down by specifying conditions

There are currently 4341 results.

I want to receive a clock over LVDS from a dedicated clock input pin on my Cyclone V device.Is there a 100 Ω differential termination resistor on the dedicated clock input pin built into the FPGA?

Tools: Quartus® II
Device: Cyclone® V
Category: Device

In Cyclone V devices, the dedicated clock input pins as well as the I/O pins have 100 Ω On-Chip Termination inside the FPGA and support True LVDS with On-Chip Termination (Rd). increase.

At that time, in the Assignment Editor,

To : <input pin>
Assignment Name : Input Termination
Value: Differential

Please compile with the following restrictions.
After compiling, check that Termination is set to Differential in Fitter ⇒ Resource Section ⇒ Input Pins in the compilation report.

For more information, please refer to the device handbook below.
https://www.altera.com/en_US/pdfs/literature/hb/cyclone-v/cv_5v2.pdf

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search