I would like to configure LVDS_RX in the Top and Bottom banks of the Arria II device, but when I set the termination resistor, an error occurs in the Fitter.

Narrow down by specifying conditions

There are currently 4342 results.

I want to configure LVDS_RX in the Top and Bottom banks in an Arria II device, but when I set the termination resistor, an error occurs in the Fitter.

<error message>
Error (169004): I/O pin rx_in[0] with Termination logic option setting Differential cannot be assigned to pin A23 pin does not support logic option setting

Arria II devices support LVDS on Column I/O banks (Top & Bottom I/O banks), but do not support internal termination resistors.
In the description of LVDS in 6-32 (198/694) of the Arria II Device Handbook at the following URL link

The Arria II GZ RD OCT is only available in the row I/O banks.

Please refer to it.

https://www.altera.com/en_US/pdfs/literature/hb/arria-ii-gx/arria-ii-gx_handbook.pdf

If LVDS_RX is configured in Top & Bottom I/O banks, please mount an external termination resistor.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search