I want to configure LVDS_RX on the Top and Bottom banks of an Arria II GZ device, but when I set the termination resistor, an error occurs in the Fitter.

Narrow down by specifying conditions

There are currently 4332 hits.

I want to configure LVDS_RX in the Top and Bottom banks of the Arria II GZ device, but when I set the termination resistor, I get an Error in the Fitter.

<error message>
Error (169004): I/O pin rx_in[0] with Termination logic option setting Differential cannot be assigned to pin *** -- pin does not support logic option setting
(*** is the pin number)

Arria II GZ devices support LVDS on the Columns (Top, Bottom) banks, but do not support internal termination resistors.
This is explained in the description of LVDS in 6-32 (198/694) of the Arria II Device Handbook at the URL link below.
The Arria II GZ RD OCT is only available in the row I/O banks.
There is a description, so please refer to it. https://www.altera.com/en_US/pdfs/literature/hb/arria-ii-gx/arria-ii-gx_handbook.pdf

When configuring LVDS_RX in Top and Bottom, please mount an external termination resistor.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search