Refers to Stratix IV GX and Stratix IV E Device Family Pin Connection Guidelines. The explanation for 6) on page 11 has been cut off, making it impossible to confirm the content.

Narrow down by specifying conditions

There are currently 4332 hits.

Refers to Stratix IV GX and Stratix IV E Device Family Pin Connection Guidelines. The description of 6) on P11 is cut off in the middle, and the contents cannot be confirmed.

In the pin guideline (PCG-01005-1.6) of the URL link below, the sentence of 6) on P11 is not broken and the document is cut off.

https://www.altera.com/en_US/pdfs/literature/dp/stratix4/pcg-01005.pdf

You can check the contents of the part that is not displayed by selecting all the relevant lines (including the blank part on the right side) and pasting it into a text editor.

The documents described in 6) are listed below. (The contents are subject to change, so please be sure to check the original text using the above method.)
For AC-coupled links, the AC-coupling capacitor can be placed anywhere along the channel. PCI Express protocol requires the AC-coupling capacitor to be placed on the transmitter side of the interface that permits adapters to be plugged and unplugged.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search