- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Narrow down by specifying conditions
There are currently 4332 hits.
When I run the download from Run as ⇒ Nios II Hardware when the Nios II CPU is configured with multiple processors, a message is displayed and the software does not run. Please let me know if there is a workaround.
Message content
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Pausing target processor: OK
Initializing CPU cache (if present)
OK
Downloading 02200020 ( 0%)
Downloading 02210000 (73%)
Downloaded 88KB in 1.5s (58.6KB/s)
Verifying 02200020 ( 0%)
Verify failed between address 0x2200020 and 0x220FFFF
Leaving target processor paused
For Nios II multi-processor configurations, you must specify a JDI (Jtag Debug ID) file.
This has occurred because this specification is not done.
The specification procedure is shown below.
1) Select Run from the Run menu
2) Click the "New" button
3) Select the Main tab
4) Click the "Load JDI File" button and select the JDI file
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.