When I use a Verilog HDL design that contains a module created with the MegaWizard Plug-In Manager and run a functional simulation with ModelSim-Altera Edition (including Starter Edition), the following error occurs when loading the design.

Narrow down by specifying conditions

There are currently 4332 hits.

When I use a Verilog HDL design containing a module created with the MegaWizard Plug-In Manager and perform functional simulation with ModelSim-Altera Edition (including Starter Edition), I get the following error when loading the design:

simulation

<error message>
Instantiation of 'function name' failed. The design unit was not found.

When functionally simulating a Verilog HDL design with the ModelSim-Altera Edition Editions (including the Starter Edition), if part of the design contains an Altera function created with the MegaWizard Plug-In Manager, the Altera function A library must be specified.

This error seems to have occurred because the Altera function library was not specified.

Before executing the load, specify the prepared library in the Libraries tab of the Start Simulation dialog Box (Simulate menu ⇒ Start Simulation) and try loading again.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search