I am cascading multiple FPGA devices with JTAG ports. Each FPGA device has an EPCS device attached to it. Is it possible to write a JIC (JTAG Indirect Configuration) file in this connection environment?

Narrow down by specifying conditions

There are currently 4332 hits.

I have multiple FPGA devices cascaded with the JTAG port. Each FPGA device has an EPCS device connected to it. Is it possible to write a JIC (JTAG Indirect Configuration) file in this connection environment?

If the FPGA devices are properly connected in the JTAG chain, you can download the JIC file to each FPGA device and program the corresponding EPSC device.
You can use the Auto Detect feature of the Quartus II Programmer to check the JTAG connection status of the FPGA.

Related Documents
Quartus® Getting Started Guide - Device Programming Methods
AN 370: Using the Intel FPGA Serial Flash Loader with the Intel Quartus Prime Software

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search