Narrow down by specifying conditions
There are currently 4292 hits.
Intel: What are the power-up time requirements for using Active Serial Fast Mode on Stratix® 10?
Category: Board
tool:-
Device: Stratix® 10
Group 1 to 3 power supplies must reach the specified value within 10ms in total.
(Reference) Intel® Stratix® 10 Device Datasheet
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/stratix-10/s10_datasheet.pdf
(See Recommended Operating Conditions for Intel Stratix 10 Devices table)
To support AS fast mode, all power supplies to the Intel Stratix 10 device must be fully ramped-up within 10 ms to the recommended operating conditions.
For the power sequence, refer to the following document.
(Reference) Intel® Stratix® 10 Power Management User Guide
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/stratix-10/ug-s10-pwr.pdf
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.