Narrow down by specifying conditions
There are currently 4292 hits.
Intel: After writing a non-volatile AES key to an Arria® 10 SoC device and programming it into the configuration ROM using the jic file, configuration fails. What are the possible causes?
Category: Configuration/Programming
Tools: Quartus® Prime
Device: Arria® 10
For 20nm devices, there are different settings during file generation for non-volatile and volatile AES keys.
Please refer to the document below for the file generation procedure.
（参考）AN 556: Using the Design Security Features in Intel FPGAs
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an556.pdf
Additional step for 20-nm FPGAs only: Turn on Enable volatile security key check box to encrypt the .sof file with volatile security key or turn it off to use non-volatile security key.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.