Intel: How should I use DisplayPort IP non-GPU mode and GPU mode settings differently?
Category: IP (DisplayPort)
Tools: Quartus® Prime
device:-
Depending on the setting, the accessible range to the registers inside the DisplayPort IP described in the DPCD Locations of the following user guide will change.
Therefore, check in which mode the function you plan to use can be used and select the mode.
(reference)
DisplayPort Intel® FPGA IP User Guide
https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_displayport.pdf
(See the DPCD Locations list in the Sink-Supported DPCD Locations section)
For example, SST (Single Stream) uses Non-GPU and MST (Multi Stream) uses GPU.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.