- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Narrow down by specifying conditions
There are currently 4342 results.
Intel: Should the switching frequency of the power supply used in MAX® 10 Single Power be 800kHz and 1MHz?
Category: Power
tool:-
Device: MAX®10
Although it is described in the Pin Connection Guideline as follows, there is no problem even if it is not 800kHz and 1MHz as long as it can meet the power requirements of the FPGA.
Intel® MAX® 10 FPGA Device Family Pin Connection Guidelines
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/max-10/pcg-01018.pdf
(Search for Low Noise Switching Regulator)
(excerpt)
The switching frequency is usually between 800kHz and 1MHz and has fast transient response.
The switching frequency range is not an Intel requirement.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.