Intel: What are the MSEL and BSEL pin settings when booting the Hard Processor System (HPS) on an Arria® 10 SoC and then configuring the FPGA?

Narrow down by specifying conditions

There are currently 4342 results.

Intel: What are the MSEL and BSEL pin settings for the Arria® 10 SoC to boot the Hard Processor System (HPS) and then configure the FPGA?

Arria SoC FPGAs

Category: SoCs
tool:-
Device: Arria® 10

The BSEL pin setting for booting the HPS is the pin that specifies where the boot source is.
Set (pin processing) to one of the following.

PDF: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/a10_5v4.pdf
HTML: https://www.intel.com/content/www/us/en/programmable/documentation/sfo1410070178831.html
(See BSEL Values for Boot Source Selection.)

When configuring the FPGA after booting the HPS, set the MSEL pin to one of the following (pin processing).

・MSEL[2:0]=000: FPP x16 and x32 Fast POR
・MSEL[2:0]=001: FPP x16 and x32 Standard POR

PDF: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/a10_5v4.pdf
HTML: https://www.intel.com/content/www/us/en/programmable/documentation/sfo1410070178831.html
(Search for MSEL Pin Settings for Each Configuration Scheme of Arria 10 Devices.)

Related FAQs

What is the difference between Arria® 10 Fast POR and Standard POR?

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search