Intel: The User Recalibration section of the Arria® 10 Transceiver User Guide describes the necessity of a reset before recalibration. Could you please tell me about the timing and specifications of the base reset signal that is input to the reset controller?

Narrow down by specifying conditions

現在 4334 件がヒットしています。

Intel: The User Recalibration section of the Arria® 10 Transceiver User Guide mentions the necessity of resetting before recalibration. Could you tell me about the timing and specifications of the base reset signal that is input to the reset controller?

Arria

Category: Transceiver
tool:-
Device: Arria® 10

See 6.8 Steps to Perform Dynamic Reconfiguration in the document below.

Intel® Arria® 10 Transceiver PHY User Guide
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/ug_arria10_xcvr_phy.pdf

1 to 4 are nativePHY settings 5 and 6 reset, 8 and 9 change data rate and PMA analog setting with profile etc. 10 recalibration, 11 and 12 reset release.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search