Narrow down by specifying conditions
There are currently 4292 hits.
Intel: Even if the JTAG clock (TCK) is set to 24MHz, a log is output as if writing at 16MHz when executing writing with the HPS Flash Programmer. Please tell me how to write at 24MHz.
<Message>
Successfully changed hardware frequency to 16Mhz
Category: SoCs
Tool: SoC EDS
device:-
The clock frequency cannot be changed due to the specifications of the HPS Flash Programmer.
Although a DS-5™ license is required, the method of writing with U-Boot has a faster writing speed, so please consider this as well.
(reference)
Faster than HPS Flash Programmer! How to write to QSPI in U-Boot
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.