Intel: Hard Processor System (HPS) peripheral GPIO signals are connected in the project TOP file (Verilog HDL/VHDL), but input-only GPI pins do not appear in the TOP file. How do I connect GPI pins to the FPGA?

Narrow down by specifying conditions

There are currently 4341 results.

Intel: GPIO signals of Hard Processor System (HPS) peripherals are connected in the project's TOP file (Verilog HDL/VHDL), but input-only GPI pins do not appear in the TOP file. How do I connect GPI pins to FPGA?

SoC FPGAs

Category: SoCs
Tools: Quartus® Prime / Quartus® II (Qsys)
device:-

To connect an input-only GPI pin to the FPGA, go to the Qsys hps settings screen and check FPGA Interfaces ⇒ General ⇒ Enable HLGPI Interface.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search