When reset is applied from tx_analogrest and tx_digitalreset of Transceiver PHY in Arria® 10, can the tx_cal_busy and rx_cal_busy signals be used to know when the reset is completed?

Narrow down by specifying conditions

There are currently 4342 results.

Can I use the tx_cal_busy, rx_cal_busy signals to know the reset completion timing when resetting from tx_analogrest, tx_digitalreset of Transceiver PHY in Arria® 10?

Arria

Category: Transceiver
tool:-
Device: Arria® 10

tx_cal_busy / rx_cal_busy is a signal for electrical calibration of the transceiver, and is not suitable as a signal for knowing the reset completion timing.
Use the tx_ready and rx_ready signals to know the reset completion timing.

Reference information
https://www.altera.com/en_US/pdfs/literature/hb/arria-10/ug_arria10_xcvr_phy.pdf
(Search with tx_cal_busy etc.)

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search