When using the Arria 10 SoC development kit with a DDR4 SDRAM daughter card connected to the DDR4 HiLO connector on the HPS side, can the necessary settings be automatically made using Preset in the Arri10 External Memory Interface MegaFunction?

Narrow down by specifying conditions

There are currently 4342 results.

When using the Arria 10 SoC Development Kit with a DDR4 SDRAM daughter card connected to the DDR4 HiLO connector on the HPS side, will the necessary settings be automatically configured by using Preset within the Arri10 External Memory Interface MegaFunction?

Arria SoC FPGAs IP

Category: External memory interface
Tools: Quartus® Prime / Quartus II
Device: Arria® 10

By selecting Arria 10 External Memory Interface in the Quartus Prime IP Catalog, highlighting Arria 10 SoC Development Kit with DDR4 (x40) from within Presets, and clicking Apply, the various settings are applied to the Arria 10 SoC Development Kit. Parametarized for DDR4 interface above.
If you use this Preset to generate an Example Design for DDR4 from the Generate Example Design button, you can use it with the pinout set for the DDR4 interface on the Arria 10 SoC development kit.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search