When using the Arria 10 GX development kit with a DDR3 SDRAM daughter card connected to the HiLO connector, can I use Preset in the Arri 10 External Memory Interface MegaFunction to automatically configure the necessary settings?

Narrow down by specifying conditions

There are currently 4332 hits.

When using the Arria 10 GX development kit with a DDR3 SDRAM daughter card connected to the HiLO connector, will the necessary settings be automatically configured if I use a Preset within the Arri 10 External Memory Interface MegaFunction?

Arria IP

Category: External memory interface
Tools: Quartus® Prime / Quartus II
Device: Arria® 10

Select Arria 10 External Memory Interface in the Quartus Prime IP Catalog, highlight Arria 10 GX FPGA Development Kit with DDR3 HILO from within Presets, and click Apply to apply the various settings to the Arria 10 GX development kit. DDR3 interface.
If you use this Preset to generate an Example Design for DDR3 from the Generate Example Design button, you can use it with the pinout set for the DDR3 interface on the Arria 10 GX development kit.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search