I would like to use a hard memory controller (HMC) on the FPGA side with my Cyclone V SoC device. What model number should I choose?

Narrow down by specifying conditions

現在 4342 件がヒットしています。

I want to use an FPGA-side hard memory controller (HMC) in my Cyclone V SoC device, what part number should I choose?

SoC FPGAs

Category: External memory controller
tool:-
Device: Cyclone® V

Ordering codes for Cyclone V devices begin with 5C, where Cyclone V SoC devices have 5C followed by SE, SX, or ST.
Next is the part that indicates whether PCI-Express (PCIe) or Embedded Hard IP of HMC is installed or not installed, and select one of the following.

F: Equipped with HMC
M: Equipped with HMC
B: without HMC

Note that not all combinations exist.
The HMC on the HPS side is installed on both the B and M model numbers.

For more information, please refer to the following documents.
https://www.altera.com/en_US/pdfs/literature/hb/cyclone-v/cv_51001.pdf
(Search for Sample Ordering Code and Available Options for Cyclone V.)

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search