- Semiconductor BusinessHOME
- Products and Services of Macnica,Inc.
-
technical information
-
Events and Seminars
- Handling Manufacturer
- Support
- Inquiry
- Click here to purchase products
- Semiconductor business e-mail magazine registration
Narrow down by specifying conditions
There are currently 4332 hits.
In MAX 10 devices, setting Pre-emphasis on LVDS output pins results in the following error: Please let me know how to avoid this.
<Error message>
Error (169161): I/O standard LVDS pin tx_out0 does not support setting 3 for Programmable Pre-emphasis
Category: Specifications
Tools: Quartus® Prime / Quartus II
Device: MAX®10
The Pre-emphasis setting for MAX 10 devices is only 0/1 setting, so select 0 (disable) or 1 (enabled) in the Programmable Pre-emphasis setting.
For details, refer to the document below.
https://www.altera.com/en_US/pdfs/literature/hb/max-10/ug_m10_gpio.pdf
(Search with the keyword Assignment for Programmable Pre-Emphasis.)
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.