When using the Single-supply type of MAX 10 device, are there any precautions to be taken when powering the download cable with 3.0V to 3.3V?

Narrow down by specifying conditions

There are currently 4342 results.

Are there any precautions for powering the download cable with 3.0V to 3.3V when using the Single-supply type of MAX 10 devices?

MAX power/Enpirion

Category: Programming/Configuration
tool:-
Device: MAX®10

To prevent overshoot, we recommend inserting either an external series resistor (damping resistor) or a clamp diode.

Target pins: TCK, TDI, TMS
① Connect with 3.0V or 3.3V using a clamp diode
② Insert series resistor

For details, refer to the document below.
https://www.altera.com/en_US/pdfs/literature/hb/max-10/ug_m10_config.pdf
(Search for Voltage Overshoot Prevention.)

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search