Narrow down by specifying conditions
There are currently 4292 hits.
Analog Devices Switching Regulators: You say that the design must be such that the inductor does not saturate. Why?
When the inductor saturates, the inductor current changes abruptly as the current rises. Malfunction may occur because the amplifier inside the regulator cannot follow sudden changes.
For details, please refer to this technical article "How to make the inductor smaller in a step-down DC/DC converter for automotive use".
(Published in March 2023)
Please feel free to ask us any questions using the inquiry form.
A person in charge of Analog Devices products will answer your question.
Experienced FAE
Free consultation is available.
From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.