Analog Devices Analog Front End: I connected ADPDUCZ to ADPD4100 and tried to update the firmware, but it cannot be updated.

Narrow down by specifying conditions

There are currently 4341 results.

Analog Devices Analog Front End : I tried to update the firmware by connecting ADPDUCZ to ADPD4100, but I can't update.

Optical Communication & Sensing

ADPDUCZ has Micro-USB and Mini-USB connectors, but from the error message "Couldn't connect to the device! Device is not in BOOT mode. Please Try Again", maybe Mini-USB It is assumed that you are using .

When updating the firmware, please connect to Micro-USB and follow the steps below to update the firmware.

Go to "Set Boot Mode" in the FW Update menu of the evaluation tool Application WaveTool

・Connect Mini-USB
・Hold down BOOT0 and press RESET once
・Release BOOT0
・Press the "OK" button of "set Boot Mode" in the tool

(Published in August 2022)

Please feel free to ask us any questions using the inquiry form.
The person in charge of Analog Devices products will answer your question.

Experienced FAE
Free consultation is available.

From specific product specifications to parts selection, the Company FAE will answer your technical concerns free of charge. Please feel free to contact us.

Inquiry form

Site Search